Chockstone Forum

      Sponsored By
      ROCK
   HARDWARE

Chockstone Photography

Australian Landscape Prints

Chockstone Forum - General Discussion

General Climbing Discussion

Author

Glue

MisterGribble

18-Jun-2020
6:02:01 PM

OK chocky types, my local wall is made of quarried sandstone blocks and occasionally the odd hold gets pulled off.
Any tips for glue - product and application - to reapply a flaked off hold about 20 x 8 cm and used only as a handhold. #birdbath

White Trash

18-Jun-2020
6:45:03 PM

On 18-Jun-2020 MisterGribble wrote:
>OK chocky types, my local wall is made of quarried sandstone blocks and
>occasionally the odd hold gets pulled off.
>Any tips for glue - product and application - to reapply a flaked off
>hold about 20 x 8 cm and used only as a handhold. #birdbath

Chemset 101.
Lots of info about it on google.
Available cheaper at Bunnings.

MisterGribble

19-Jun-2020
6:48:33 AM

Righteous, ta

E. Wells

19-Jun-2020
8:23:16 AM

Glue it first, then when glue sets, drill a few 14-16cm holes through it into main wall and glue some 8 or 10mm threaded rod into it to reinforce it proper. Bring a big bag of similarly coloured sand to camouflage the pins and glue job.

Stonks

9-Aug-2020
5:10:43 PM

if you're using the gun, get a few extra little plastic nozzles for when the glue hardens in them

There are 5 messages in this topic.