Author |
Frame to use a hang board in a door and print outs |
|
|
22-Nov-2010 8:40:27 PM
|
I have a shit load of print outs from the ACA on line guide from over the past few years of climbing around Sydney. About to head back to the UK for a stint over there and I thought if anyone wants them save me chucking them out then just say so. Its a pile about an inch thick including Narrabeen, Berowra, a few random blue mountains and the wingello guide and a load more.
I also have a frame I made to mount a finger board.
Here is a picture of it in my flat with my beastmaker attached, unfortunately this is not included in this offer I am going to keep it.
http://dl.dropbox.com/u/8574733/IMG_4342.JPG
The frame is 860mm wide to the out side edges and 2110 high to the top of the main cross support. It needs a G clamp to keep it upright as you can see in the frame and I can throw this in as I have no need for it.
Don't want any money for either of these things I just don't want to throw them out when someone might want them.
I live in glebe and am around for the next week - I leave Sydney next Monday so PM me ASAP if your interested in either and we can arrange pick up or something.
OT AKA Monkey Boy
|
23-Nov-2010 5:51:40 PM
|
Bump _ realised the name of the thread wasn't actually accurate so changed and bumped
|
23-Nov-2010 5:55:27 PM
|
I'd love to take you up on your offer, MonkeyBoy, but the only doors in my house that I could use are about 20cm wider than your frame :-(
|
23-Nov-2010 10:44:58 PM
|
Doh ! its a small flat so its probably not a standard door.
|
25-Nov-2010 11:59:02 AM
|
Bump - This has to go in the bin of no one wants it by the weekend !
|