Author |
|
16-Jan-2014 1:30:10 PM
|
>"Another advantage of Wave Bolts is that since they are made in the U.S.,
>they are sized in inches rather than millimeters. No more having to purchase
>expensive, hard to find metric drill bits!"
considering they're glue in bolts, the 0.5mm difference in hole size will make zero difference, so another non-issue created then solved!!
|
16-Jan-2014 2:44:44 PM
|
On 16/01/2014 sliamese wrote:
>considering they're glue in bolts, the 0.5mm difference in hole size will
>make zero difference, so another non-issue created then solved!!
Then recreated if it is an undersized 0.5 mm diff.
|
16-Jan-2014 2:53:04 PM
|
On 16/01/2014 sliamese wrote:
>>"Another advantage of Wave Bolts is that since they are made in the U.S.,
>>they are sized in inches rather than millimeters. No more having to purchase
>>expensive, hard to find metric drill bits!"
>
>considering they're glue in bolts, the 0.5mm difference in hole size will
>make zero difference, so another non-issue created then solved!!
Except the idea is they can be weighted without glue or without the glue setting? In which case the size has to be pretty right.
|
16-Jan-2014 6:46:43 PM
|
You can hang on Ubolts also, you get glued up biners. No big deal
|