Chockstone Forum

      Sponsored By
      ROCK
   HARDWARE

Chockstone Photography

Australian Landscape Prints

Chockstone Forum - General Discussion

General Climbing Discussion

Topic Date User

Bolting in the Warrumbungles 16-May-2011 At 3:00:51 PM tnd

Message

On 16/05/2011 Andrew_M wrote:
>...The argument as I understand it is that the bolts
>are for rap retreats from Leiben and Cornerstone Rib....
If someone needs to retreat from these naturally protected adventure routes then they can leave gear in place.

>How long the bolts remain will be interesting...someone who I told turned
>instantaneously purple, started spluttering and immediately started looking
>for a crowbar.
A crowbar isn't necessary.

To remove stainless carrots, use a 12 inch plumber's (Stillson) wrench with a tube extension and turn anti-clockwise. You'll break the glue bond quite easily and you can then unscrew.

To remove recessed ring bolts, use a hammer and chisel to carefully chip away enough of the surrounding rock (not much required) to allow the ring to rotate. Now use a bar through the hole, or the wrench mentioned above, to rotate and extract the bolt.

To remove U-bolts, cut through the steel at the top of the U with a hacksaw. Now turn each shaft with the wrench to break the glue bond and twist out.